REFINE 

Browse All : Images from 02-02-2007

1-12 of 12
KENNEDY SPACE CENTER, FLA. -- Members of the STS-118 crew take part in a hardware review of the SPACEHAB module, part of the payload on their mission. Seen here (in uniforms) from left are Mission Specialists Dafydd Williams and Barbara Morgan and Pilot Charles Hobaugh. Williams represents the Canadian Space Agency. The mission payload also includes the third starboard truss segment (ITS S5), a control moment gyro and the external stowage platform 3 (ESP3). STS-118 is targeted to launch June 28 from Launch Pad 39A. Photo credit: NASA/Kim Shiflett
KENNEDY SPACE CENTER, F...
No copyright protection...
NASA or National Aerona...
 
KENNEDY SPACE CENTER, FLA. -- Members of the STS-118 crew take part in a hardware review of the SPACEHAB module, part of the payload on their mission. Seen here is Mission Specialist Barbara Morgan, facing forward at the entrance of the module. The mission payload also includes the third starboard truss segment (ITS S5), a control moment gyro and the external stowage platform 3 (ESP3). STS-118 is targeted to launch June 28 from Launch Pad 39A. Photo credit: NASA/Kim Shiflett
KENNEDY SPACE CENTER, F...
No copyright protection...
NASA or National Aerona...
 
KENNEDY SPACE CENTER, FLA. -- In the Space Station Processing Facility, members of the STS-118 crew learn important information from technicians about the control moment gyro (CMG) in front of them that is part of the payload on their mission. Second from left is Mission Specialist Tracy Caldwell; at right are Mission Specialists Richard Mastracchio (pointing) and Clayton Anderson, who will be flying on STS-118 to join the Expedition 15 crew as flight engineer on the International Space Station. The CMG will replace a faulty one on the International Space Station. The payload also includes the SPACEHAB single cargo module, the third starboard truss segment (ITS S5) and the external stowage platform 3 (ESP3). STS-118 is targeted to launch June 28 from Launch Pad 39A. Photo credit: NASA/Kim Shiflett
KENNEDY SPACE CENTER, F...
No copyright protection...
NASA or National Aerona...
 
KENNEDY SPACE CENTER, FLA. -- In the Space Station Processing Facility, members of the STS-118 crew learn important information from technicians about the control moment gyro (CMG) in front of them that is part of the payload on their mission. At far left is Commander Scott Kelly; at center is Mission Specialist Tracy Caldwell; and at far right is Mission Specialist Richard Mastracchio. The CMG will replace a faulty one on the International Space Station. The payload also includes the SPACEHAB single cargo module, the third starboard truss segment (ITS S5) and the external stowage platform 3 (ESP3). STS-118 is targeted to launch June 28 from Launch Pad 39A. Photo credit: NASA/Kim Shiflett
KENNEDY SPACE CENTER, F...
No copyright protection...
NASA or National Aerona...
 
KENNEDY SPACE CENTER, FLA. -- In the Space Station Processing Facility, members of the STS-118 crew learn important information from technicians about the control moment gyro (CMG) in front of them that is part of the payload on their mission. Second from left is Mission Specialist Tracy Caldwell; at center, behind the CMG, is Mission Specialist Richard Mastracchio; second from right is Mission Specialist Clayton Anderson, who will be flying on STS-118 to join the Expedition 15 crew as flight engineer on the International Space Station. The CMG will replace a faulty one on the International Space Station. The payload also includes the SPACEHAB single cargo module, the third starboard truss segment (ITS S5) and the external stowage platform 3 (ESP3). STS-118 is targeted to launch June 28 from Launch Pad 39A. Photo credit: NASA/Kim Shiflett
KENNEDY SPACE CENTER, F...
No copyright protection...
NASA or National Aerona...
 
KENNEDY SPACE CENTER, FLA. -- Members of the STS-118 crew take part in a hardware review of the SPACEHAB module, part of the payload on their mission. Seen here inside the module are Mission Specialists Dafydd Williams (center) and Barbara Morgan. Williams represents the Canadian Space Agency. The mission payload also includes the third starboard truss segment (ITS S5), a control moment gyro and the external stowage platform 3 (ESP3). STS-118 is targeted to launch June 28 from Launch Pad 39A. Photo credit: NASA/Kim Shiflett
KENNEDY SPACE CENTER, F...
No copyright protection...
NASA or National Aerona...
 
KENNEDY SPACE CENTER, FLA. -- Members of the STS-118 crew take part in a hardware review of the SPACEHAB module, part of the payload on their mission. Looking inside one of the stowage compartments are Pilot Charles Hobaugh (holding a light) and Mission Specialists Dafydd Williams and Barbara Morgan. Williams represents the Canadian Space Agency. The mission payload also includes the third starboard truss segment (ITS S5), a control moment gyro and the external stowage platform 3 (ESP3). STS-118 is targeted to launch June 28 from Launch Pad 39A. Photo credit: NASA/Kim Shiflett
KENNEDY SPACE CENTER, F...
No copyright protection...
NASA or National Aerona...
 
KENNEDY SPACE CENTER, FLA. -- In the Space Station Processing Facility, members of the STS-118 crew learn important information from technicians about the control moment gyro (CMG) in front of them that is part of the payload on their mission. At left is Commander Scott Kelly; at right is Mission Specialist Tracy Caldwell. The CMG will replace a faulty one on the International Space Station. The payload also includes the SPACEHAB single cargo module, the third starboard truss segment (ITS S5) and the external stowage platform 3 (ESP3). STS-118 is targeted to launch June 28 from Launch Pad 39A. Photo credit: NASA/Kim Shiflett
KENNEDY SPACE CENTER, F...
No copyright protection...
NASA or National Aerona...
 
KENNEDY SPACE CENTER, FLA. -- Members of the STS-118 crew take part in a hardware review of the SPACEHAB module, part of the payload on their mission. Seen here inside the module are Mission Specialists Richard Mastracchio (left), Dafydd Williams (center, standing) and Barbara Morgan (lower right). Williams represents the Canadian Space Agency. The mission payload also includes the third starboard truss segment (ITS S5), a control moment gyro and the external stowage platform 3 (ESP3). STS-118 is targeted to launch June 28 from Launch Pad 39A. Photo credit: NASA/Kim Shiflett
KENNEDY SPACE CENTER, F...
No copyright protection...
NASA or National Aerona...
 
KENNEDY SPACE CENTER, FLA. -- In the Space Station Processing Facility, members of the STS-118 crew look at a mockup of the control moment gyro (CMG) and the insulating cover. The CMG is part of the payload on their mission. At the far left is Mission Specialist Tracy Caldwell; at right are Mission Specialists Clayton Anderson and Richard Mastracchio (holding the cover). Anderson will be flying on STS-118 to join the Expedition 15 crew as flight engineer on the International Space Station. The CMG will replace a faulty one on the International Space Station. The payload also includes the SPACEHAB single cargo module, the third starboard truss segment (ITS S5) and the external stowage platform 3 (ESP3). STS-118 is targeted to launch June 28 from Launch Pad 39A. Photo credit: NASA/Kim Shiflett
KENNEDY SPACE CENTER, F...
No copyright protection...
NASA or National Aerona...
 
KENNEDY SPACE CENTER, FLA. -- In the Space Station Processing Facility, members of the STS-118 crew look over the control moment gyro (CMG) that is part of the payload on their mission. At left is Commander Scott Kelly; at right is Mission Specialist Tracy Caldwell. The CMG will replace a faulty one on the International Space Station. The payload also includes the SPACEHAB single cargo module, the third starboard truss segment (ITS S5) and the external stowage platform 3 (ESP3). STS-118 is targeted to launch June 28 from Launch Pad 39A. Photo credit: NASA/Kim Shiflett
KENNEDY SPACE CENTER, F...
No copyright protection...
NASA or National Aerona...
 
KENNEDY SPACE CENTER, FLA. -- Members of the STS-118 crew take part in a hardware review of the SPACEHAB module, part of the payload on their mission. Seen here inside the module are Mission Specialists Dafydd Williams (center) and Barbara Morgan. Williams represents the Canadian Space Agency. The mission payload also includes the third starboard truss segment (ITS S5), a control moment gyro and the external stowage platform 3 (ESP3). STS-118 is targeted to launch June 28 from Launch Pad 39A. Photo credit: NASA/Kim Shiflett
KENNEDY SPACE CENTER, F...
No copyright protection...
NASA or National Aerona...
 
1-12 of 12